Manufacturing Standards

The table below gives an overview of the standards we produce parts to at SGD 3D, this includes:

The layer height / resolution that the relevant materials are expected to be printed in
Standard infill for all available materials on the instant quote system
Maximum deviation a printed part can have from its intended and original dimensions (tolerance limit)

For parts requiring FAIR (First Article Inspection Reports), these are available for an additional charge upon request.

Material	Default Layer Height	Default Infill	Accuracy
ABS	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.60 % above 100mm
ASA	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.60 % above 100mm
Flame Retardant Resin	0.10 mm	100%	± 0.10 mm below 100mm / ± 0.15 % above 100mm
Nylon PA12 GF	0.11 mm	100%	± 0.30 mm below 100mm / ± 0.30 % above 100mm
PC-ESD	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.60 % above 100mm
PC-FR	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.60 % above 100mm
PEEK	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.75 % above 100mm
PEEK-CF	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.75 % above 100mm
PEEK-GF	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.75 % above 100mm
PETG	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.60 % above 100mm
PLA	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.60 % above 100mm
Resin (Standard – Black, Clear & White)	0.10 mm	100%	± 0.10 mm below 100mm / ± 0.15 % above 100mm
RIGID 4000	0.10 mm	100%	± 0.10 mm below 100mm / ± 0.15 % above 100mm
RIGID 10K	0.10 mm	100%	± 0.10 mm below 100mm / ± 0.15 % above 100mm
TOUGH 2000	0.10 mm	100%	± 0.10 mm below 100mm / ± 0.15 % above 100mm
ULTEM 1010	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.75 % above 100mm
ULTEM 9085	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.75 % above 100mm
ULTEM-CF	0.20 mm	20%	± 0.30 mm below 100mm / ± 0.75 % above 100mm